Seca Analitics 115 - Manual (Page 24)

24 •
WARNING!
Data loss due to incomplete saving
If you do not close a patient file after saving it
and you enter another patient file, the data of
the first patient will be overwritten.
– Close a newly-created patient file before you
create another patient file.
4. Click on Close .
The patient list is shown again.
Additional patient files can be created.
Copying patient files to
a USB stick
If you wish to work with patient files on a seca mbca
and there is no wireless or Ethernet connection to this
device, you can use an initialised USB flash memory
stick.
NOTE:
If you are not sure whether the available USB
stick has been initialised, contact your
administrator.
To copy data to a USB stick, proceed as follows:
1. Plug the USB stick into a free USB port on your PC.
The message USB stick detected will appear.
2. Click OK .
The dialog window closes.
3. In the main patient list select the patient files you
wish to copy to the USB stick.