Mediabridge MWN-WAPR300N User Guide - Manual (Page 57)

MWN-WAPR300N
52
Chapter 10 System Tools
10.1 Time Settings
This section is to configure the rou ter’s system time. You can set it manually or obtain the
GMT time from the Internet.
 Time Zone: Select the time zone where you are operating the Router from the
drop-down list.

Customized time: Enter the time you wish to configure. This time is automatically
acquired from your connected computer’s time settings.
NOTE:
When the Router is powered off, the time settings will be lost. The router will obtain the
GMT time automatically the next time you access the Internet. Only when you connect to
the Internet and obtain the GMT time or set the time on this screen, can the time settings
in other functions (e.g. security settings) take effect.
10.2 DDNS
DDNS (Dynamic Domain Name System) is used to assign a fixed host and domain
name to a dynamic Internet IP address. Every time you access the Internet, the dynamic
domain name software installed
on your host will tell the ISP’S host server its dynamic IP
address by sending messages. The server software is responsible for providing DNS
service and implementing dynamic domain name resolution.