Mediabridge MWN-WAPR300N User Guide - Manual (Page 38)

MWN-WAPR300N
33
change the settings of both routers.

AP MAC Address: Input the MAC address of another (opposing) wireless router
that supports WDS that you want to connect.
Example: This example shows how to bridge two MWN-WAPR300N routers.
First check the following settings:
First MWN-WAPR300N (connected to your ISP)
LAN IP Address:
SSID:
Channel:
Extension Channel:
Wireless Security:
Wireless Working Mode: WDS Bridge Mode
DHCP Server: Enabled
Second MWN-WAPR300N (used to extend your network)
LAN IP Address: 192.168.8.XXX where XXX is 2~254 (192.168.8.2 will be used in this
example)
SSID: