Mediabridge MWN-WAPR300N User Guide - Manual (Page 11)

MWN-WAPR300N
6
6. Click Apply, and then OK, and the Medialink router will reboot.
7. After rebooting, enter the Username and Password (default: admin for both)
then click any of the “Advanced Settings” links on the Basic Settings Screen to enter
into the Router’s settings section. If the connection is lost, change the Yellow Port that
you are plugged into. Disconnect the Ethernet from the Yellow LAN Port it is plugged
into and plug it into a different Yellow LAN Port.
8. Once you are logged back into the Medialink router, name your wireless
network: Click Wireless Settings then click Basic Settings. Change the SSID name
to a name that will identify your wireless network (For example: Smith or MyWireless.)
Then, Click Apply. Click Ok.
9. Setup security for your wireless network: Click Wireless Settings, then click
Wireless Security Settings. Here you can change your wireless password. Click Apply
when finished. Record this case sensitive password for your records.
10. Disable the DHCP Server by clicking DHCP Server, uncheck Enable, click
Apply.
11. Power down the Medialink router, and your original router by unplugging the
power cord from the power outlet.
12. Connect an Ethernet cable from the Original Router to any of the YELLOW
LAN ports (Not the Blue WAN port) of the Medialink router. (At this point the Medialink
router will have 2 x yellow ports occupied – one to the computer and one to the original
router)
13. Power up the Original Router, wait 30 seconds for it to fully restart, Power up
the Medialink Router, wait 30 seconds for it to fully restart.
14. Test the internet connection through the computer that is currently hardwired
to the Medialink Router:
a. If you do not have internet through the wired connection, you may
need to power cycle all devices in the network and start them
again slowly starting with the device closest to the ISP connection.
15. Test the internet connection to the Medialink router via a wireless device.
If you still cannot connect to the internet, please download the latest FAQ at
medialinkproducts.com/support or please call technical support at 856-216-8222