Mediabridge MWN-WAPR300N User Guide - Manual (Page 23)

MWN-WAPR300N
18
will get a different IP Address. You do not need to enter any parameters in this mode, just
Click “Apply” to apply the setting.
PPTP

Mode: Show your current connection mode.

PPTP Server Address: The IP address or domain name of the destination server
is used to specify the destination address for the PPTP connection.

Username/Password: Used to validate identity when connecting to the PPTP
server.

Address Mode: S
et the router’s IP address mode. You can select either
“Dynamic” or “Static”. If your ISP doesn’t provide the IP address, please select
“Dynamic”.

IP Address: Please enter the IP address provided by your ISP.

Subnet mask: Please enter the subnet mask provided by your ISP, generally it is
255.255.255.0 or similar.

Gateway: Please enter the gateway provided by your ISP.