Mediabridge MWN-WAPR300N User Guide User Manual

Page 48

MWN-WAPR300N

you

can build a FTP server on your computer and set the router’s port range forwarding

to enable your friends to access to these files on your computer. Suppose that your FTP

server or your computer’s static IP address is 192.168.8.10, and you want your friends to

access the server through the default FTP port: 21 and use TCP protocol.

Please follow the steps below to configure.

1.Enter 21 in both start port and end port fields, or you can also select FTP from the

well-known service port and port 21 will be added to the corresponding fields

automatically.

2. Enter 192.168.8.10 in the LAN IP column, and then select

“Both” as the protocol and

select “Enable” as shown below:

Then scroll all the way to the bottom of the page and click

the “Apply” button to save the

settings.

Now, when your friends want to visit the FTP server, they only need to enter

ftp://xxx.xxx.xxx.xxx:21 in their browser address field. Here, xxx.xxx.xxx.xxx means your

router’s WAN IP address. For example, when your router’s WAN IP address is

24.65.128.52; your friends need to enter

ftp://24.65.128.52:21

in the browser address

field.