LumaSense Technologies IS 6 Advanced - Manual (Page 37)

IS 6 Advanced / IGA 6 Advanced Manual Data format UPP Ò · 37
Description Command Parameters
Device type /
Software version AAve Answer: VVMMJJ VV=54
MM=Month JJ = Year of software version
Communication
Module/ software
version in detail AAvc tt.mm.jj XX.YY
tt = day; mm = month; jj = year;
XX.YY = Software version
Software version in
detail
AAvs tt.mm.jj XX.YY
tt = day; mm = month; jj = year;
XX.YY = Software version
Note: the letter “l” means the lower case letter of “L”.
Additional instruction for the RS485 interface:
Requirements to the master system during half-duplex operation:
1. After an inquiry, the bus should be switched into a transmission time of 3 bits (some
older interfaces are not fast enough for this).
2. The pyrometer's response will follow after 5 ms, at the latest.
3. If there is no response, there is a parity or syntax error and the inquiry has to be
repeated.
4. After receiving the response, the master has to wait at least 1.5 ms before a new
command can be entered.