6 accessories (optional), 1 mounting, 2 cooling jacket – LumaSense Technologies IS 6 Advanced User Manual
Page 12: 3 air purge, 4 vacuum pickup, 5 scanning mirror, 6 flange system
IS 6 Advanced / IGA 6 Advanced Manual
Introduction · 12
2.6 Accessories (optional)
Numerous accessories guarantee easy installation of the pyrometer. The following overview
shows a selection of suitable accessories. You can find the entire accessory program with all
reference numbers in Chapter
, Reference numbers.
2.6.1 Mounting
Mounting brackets are available for safe mounting and alignment of
the pyrometer to the measuring object.
Mounting angle
2.6.2 Cooling Jacket
The stainless steel housing with integrated water cooling air purge
allows use of the pyrometer above the maximum permissible ambient
temperature. The pyrometer can be operated in ambient temperatures
up to 180 °C.
Water cooling jacket with
integrated air purge
2.6.3 Air Purge
The air purge protects the lens from contamination of dust and
moisture. It has to be supplied with dry and oil-free pressurized air and
generates an air stream shaped like a cone.
Air purge
2.6.4 Vacuum Pickup
The vacuum pickup KF 16 with window allows the user to easily mount
the pyrometer on vacuum systems.
Vacuum Pickup
2.6.5 Scanning Mirror
The scanning mirror unit SCA 5 allows the measured object to be
scanned over a certain range. The measuring beam of the pyrometer
moves straight in one line across the object and collects temperature
data of this line. This is useful when used in combination with the
maximum value storage (peak picker) to measure objects which move
out of the target area. The scanning angle of the mirror is 0 to 12° and
the scanning frequency 0 to 5 Hz. Both values are easily adjustable at
the scanner.
Scanning Mirror
2.6.6 Flange System
The flange system is a modular mounting system
to fix the pyrometer on furnaces, vacuum
chambers, etc.
It can consist of e.g. mounting support, tube
support with air purge and flange and an open or
closed ceramic sighting tube. The mounting
Schematic drawing of the flange system
Pyrometer
IS 6 Advanced /
IGA 6 Advanced
Ceremaic
sighting tube
600 x 24, closed
Tube support
with air purge
nozzle and
flange
Instrument’s
support