LT Security LTD9056M6 - Manual (Page 18)

User Manual
16
LAN-DVR Connection
See the diagram below for steps to connect your DVR to a local area network or the internet.
For remote monitoring from your computer，you must have a LAN connection available or
broadband Internet access.
HTTP PORT: This port number is used to
communicate with PC Client. The default value is
80(Can be changed from 1024 to 49151)
USER SETUP: When accessing the DVR
from a remote location you will be prompted for a
login and password. The default is “admin” for
full administrator rights. Set “User ID” and
password to setup a user with limited rights to
prevent tampering.
DDNS SETUP：If you require an external
service to maintain a dynamic IP address enter
the user information here.
USER SETUP
ADMIN ID [admin]
ADMIN PASSWORD
USER ID
USER PASSWORD
( )MOVE (SEL)SELECT (MENU)EXIT
[111111]
[ ]
[ ]
DDNS SETUP
DDNS PROVIDER
DDNS USER NAME
DDNS PASSWORD
DOMAIN NAME
( )MOVE (SEL)SELECT (MENU)EXIT
[WWW.DynDNS.com ]
[ ]
[ ]
[ ]
NETWORK SETUP
MAC ADDRESS
IP ALLOCATION
IP ADDRESS
SUBNET MASK
GATEWAY
DNS1 ADDRESS
DNS2 ADDRESS
HTTP PORT
USER SETUP
DDNS SETUP
(HTTP PORT) 80, 1024-49151
( )MOVE (SEL)SELECT (MENU)EXIT
<00:11:22:33:44:55>
[STATIC]
[192.168.1.100]
[255.255.255.0]
[192.168.1.1]
[0.0.0.0]
[0.0.0.0]
[ 80]