LT Security LTD9056M6 - Manual (Page 12)

User Manual
10
5.11 Hard Drive Setup
This section will display the current hard drive status and usage options
HDD SIZE: Indicates the total capacity of the hard drive installed in the DVR.
HDD USED: Indicates the space used in the hard disk drive for recording and the percent used.
HDD FORMAT: Will erase all video and data on the installed hard drive and make it readable by
the DVR
Note : You will be prompted for the password when formatting a hard drive. The default
password is “111111”
5.12 Miscellaneous Setup - Change Password
Area Selection:
Press [▲, ▼, ◄◄ or ►►] button to select a
block, and press [SEL] button to set the block to detect
motion. The area is detectable when it is clear, the area is
not detectable when it is covert by shadow.
Press “Stop” button to disable all areas, press
“Quad” or “ALL” button to enable all areas.
Overwrite Enabled:
ON: Overwrite oldest video when hard drive is full.
OFF: Stop recording when hard drive is full.
This option allows you to change the system
password. The password must be composed with
six characters.
All keys can be used as password key except
the [MENU] key, which is used to exit.
HARD DRIVE SETUP
OVERWRITE ENABLED [ ON ]
ST3160215A
MASTER HDD SIZE 160133MB
MASTER HDD USED 124931MB 78%
MASTER HDD FORMAT
SLAVE HDD SIZE N/A
SLAVE HDD USED N/A
SLAVE HDD FORMAT
( )MOVE (SEL)SELECT (MENU)EXIT
MISCELLANEOUS SETUP
CHANGE PASSWORD
SET TIME
HIDDEN CHANNEL
AUDIO PORT SETUP
PTZ SETUP
IMAGE PARAMETERS
PASSWORD ENABLE
KEYPAD TONES
SEQ. DWELL TIME
VGA SETUP
( )MOVE (SEL)SELECT (MENU)EXIT
[ 4 ]
[ CH4 ]
[ OFF ]
[ ON ]
[ 05 ]
[1024*768 75HZ]