LT Security LTD9056M6 - Manual (Page 10)

User Manual
8
5.6 Video Quality
5.7 Record Schedule
Setting the Record Schedule allows you to customize the type of recording depending on the
time of day.
NO-RECORD [ white]: DVR will not record during the time.
NORMAL-RECORD [ red]: DVR will record continuously.
SENSOR-RECORD [S]: DVR will record when sensor or motion is triggered.
NOTE: In order to activate the record schedule, press the [ ] record button when viewing the
cameras. After pressing the [ ] record button, if schedule is set to “NORMAL-RECORD” , the
DVR will start to record immediately; if the schedule is set to be “SENSOR-RECORD” , the
DVR will not start recording until a motion is detected by the DVR or an installed sensor is
triggered.
Video Quality has 4 different settings:
Highest, High, Normal and Low.
The higher the video quality, the better
quality of images, however higher quality
images require more hard drive space.
Press [SEL] to change the quality setting.
The time line indicates 24 hours of a day based
on AM/PM (0 = 12).
Press [▲, ▼, ◄◄ or ►►] button to select a
time point, press [SEL] to modify the recording
mode.
RDCORD SCHEDULE
AM PM
0… 3… 6… 9… 0… 3…. 6… 9…
NO-RECORD
NORMAL-RECORD
SENSOR-RECORD
( )MOVE (SEL)SELECT (MENU)EXIT
MAIN MENU
CAMERA SETUP
RECORD SETUP
RECORD FRAMERATE
VIDEO QUALITY NORMAL
RECORD SCHEDULE
SENSOR SETUP
HARD DRIVE SETUP
MISCELLANEOUS SETUP
NETWORK SETUP
LANGUAGE ENGLISH
VIDEO BACKUP
RESET MENU
( )MOVE (SEL)SELECT (MENU)EXIT
S