2 main interface – LT Security LTD5304 User Manual
Page 54
Digital Video Recorder User Manual
52
STEP3
Click "Security" option, and click "Custom Level…" in "Security level for this zone", it will pop up "Security
Settings" window as Fig. 4-3.
STEP4
In "Security Settings" window, enable all the options under ActiveX controls.
STEP5
Click "OK" to finish setting the parameters.
STEP6
Input IP of the DVR in IE textbox, then press "Enter" key.
STEP7
The Network Client interface will be displayed in IE browser as Fig. 4-1.
Notice: When the Network Client is running on VISTA operation system, you also need set relational ActiveX parameters. Steps of setting
parameters are shown as follows:
1. Open IE browser, then select ‘Internet Options > Advanced > Security’
2. Enable ‘Allow software to run or install even if the signature is invalid’ and ‘Allow active content to run in files on my computer’.
3. Click "OK" to finish the settings.
4.2 Main Interface
The function button of the remote surveillance is shown as Fig.4-4.