LT Security LTD5304 - Manual (Page 27)

Digital Video Recorder User Manual
25
Fig3.11 Detection Area Setup
Sub-steps for manually selecting the detection area are described as below:
1. In the Area Setup submenu, choose "CUSTOM" option.
2. Press "Enter" key to confirm the operation.
3. Select the part to be detected.
4. Press "Enter" key to select or cancel the part.
5. Press "Esc" button to confirm the option and exit "CUSTOM" option.
STEP3 Press "BACK" option to go back the Motion Alarm Configuration menu.
Notice: In continuous recording mode, manual record and alarm record are activated at the same time. The alarm events can be found in
Search by Event”, please refer to the account of ‘3.3.2 Search’ function in ‘3 Search by Event’.
9. COPY TO
Users can copy the settings of this channel to any other selected channel.
SENSOR ALARM
Sensor alarm submenu is shown as Fig. 3.12. Every Sensor matches one or more channels.