LT Security LTD5304 User Manual

Page 31

Digital Video Recorder User Manual

Set PTZ address. Press "Enter" key and use the number key, "+" and "-" buttons to set.

5. PRESET

STEP1

Press "SET" button to enter Preset submenu shown as Fig. 3.15. There are 16 presetting points that can be

set in every channel.
STEP2

In Preset submenu, press "Enter" button to switch the presetting point needing to be reset.

STEP3

Press "ADJUST" button to enter the PTZ mode.

STEP4

On the front panel, press "ZOOM", "FOCUS", "SPEED", "IRIS", "+" (MENU) and "-" (PTZ) buttons to modify

position of the presetting point.
STEP5

Press "UP", "DOWN", "RIGHT" and "LEFT" buttons to rotate the Speed Dome.

STEP6

Press "ESC" button to come back Preset menu.

STEP7

Press "SAVE" button to save the setting, and press "CANCEL" to discard the setting.

Notice: how to use the presetting point:

Users can use the number key to switch the presetting point in PTZ mode. Firstly, press "PTZ" button to enter PTZ mode, then press

the number key such as "1", and the Speed Dome will move to presetting point 1.

6. COPY

Users can copy the settings of this channel to all or any other selected channel.

3.2.6 User Configuration

User Configuration is shown as Fig 3.16. The default username is Admin. Administrator can add users, set users’
authorization and delete users.