LT Security LTD7904 User Manual

Page 58

Digital Video Recorder User Manual

Step 5: Open IE browser, input IP address, or dynamic domain name and enter. If HTTP port is not 80, add the port number
after IP address or domain name.
Step 6: IE will download ActiveX automatically. Then a window pops up and asks for user name and password. Input name and
password correctly, and enter to view.

Note: If you cannot download and install ActiveX, please refer to Appendix A FAQ Q8.

2. Connect the DVR to internet directly.
Step 1: Enter into the DVR’s Main Menu

Setup

Network interface to enable PPPoE and then input user name and password

received from your ISP. Next, click ‘Apply’. The DVR will connect to the server and would give a confirmation message.
Step 2: When accessing the remote interface of DVR, user can input WAN IP to access directly (user can enter into Main
menu

Information

Network interface to check IP address). The browser will download Active X control

Fig 7-1 View with IE browser

This manual is related to the following products:

LTD7908