LT Security LTD2316SE-SL - Manual (Page 35)

29
Digital Video Recorder User Manual
will be cleared; click icon, user can test whether the sensitivity value and motion area are suitable accordingly
（refer to
following picture
）; Click
icon, to save the setting; click icon, exit current interface.
Note: when user drag mouse to set motion detection area, they have to click icon to clear all set detection area
firstly, and then make the operation.
Step6: user can setup all channels with same parameters, tick off “all”, then to do relevant setup.
② Schedule
Step1: enter into system configuration
alarm configurationschedule; refer to Fig 4-25:
Fig3-25 alarm configuration-schedule
Step2: the setup steps of alarm schedule are familiar with schedule; user can refer to 4.4.1 Schedule for details.