LT Security LTD2316SE-SL - Manual (Page 34)

28
Digital Video Recorder User Manual
4.5.2 Motion
Motion includes two sub menus: motion and schedule.
① Motion
Step1: enter into system configuration
alarm configurationmotion; refer to Fig 4-23:
Fig 4-23 alarm configuration-motion
Step2: enable motion alarm, set alarm hold time which means time interval between two adjacent detective motions. If there is
other motion detected during the interval period which is considered continuous movement; otherwise, it will be considered that
those two adjacent detective motions are two different motion events. Click Trigger button, a dialog box will pop-up:
Step3: the setup steps of motion trigger are familiar with alarm handling; user can refer to Chapter 4.5.1 Sensor
alarm
handling for more details.
Step4: click Area button, a dialog box will pop-up as Fig 4-24:
Fig 4-24 motion-area
Step5: in the Area interface, user can drag slide bar to set the sensitivity value (1-8), the default value is 4. The higher the value
is the higher sensitivity you get. Due to the sensitivity is influenced by color and time (day or night), user can adjust its value
according to the practical conditions; click
icon, set the whole area as detection area; click icon, the set detection area