Remote controller, Step3: replace the battery cover, Check batteries poles – LT Security LTD2316SE-SL User Manual
Page 13: Check the remaining charge in the batteries, Check ir controller sensor is mask, 4 remote controller
7
Digital Video Recorder User Manual
Item
Name
Description
11
NET
Network port
12
Spot out
Connect to monitor as an AUX output channel by channel. Only video display,
no menu show
13
Video in
Video input channels from 1-16
14
Power input
DC12V
2.4 Remote Controller
It uses two AAA size batteries and works after loading batteries as following:
Step1: Open the battery cover of the Remote Controller.
Step2: Place batteries. Please take care the polarity (+ and -).
Step3: Replace the battery cover.
Notice: Frequently defect checking as following.
1. Check batteries poles.
2. Check the remaining charge in the batteries.
3. Check IR controller sensor is mask.
If it still doesn't work, Please change a new remote controller to try, or contact your dealers.
The interface of remote controller is shown in Fig2.4 Remote Controller.