LT Security LTD2316SE-SL - Manual (Page 33)

27
Digital Video Recorder User Manual
Step3: Buzzer: If selected, the local buzzer would be activated on an alarm.
Full screen alarm: when triggered alarm, there will pop up full screen alarm.
Email: If selected. When an alarm trigged, a notification email will be sent to user’s designed email box including trigger events,
time, snap pictures, device name, ID camera name etc.
Snap: Select channels. When an alarm is trigged, the system will automatically save the captured pictures from the selected
channel. If user tick off Email function, these pictures will also be sent to user’s designed email box.
To alarm out: tick off the channel, there will be triggered alarm out in the designated channel. Click OK button to save the setting;
click Exit button to exit the current interface.
To record: tick off recoding channels. It will record the camera when alarm triggered. Click OK button to save the setting; click
Exit button to exit the current interface.
To P.T.Z: set linked preset and cruise for alarm. User can select any channel and multi channels as linked channels. Click OK
button to save the setting; click Exit button to exit the current interface.
Step4: user can setup all channels with same parameters, tick off “all”, then to do relevant setup.
③ Schedule
Step1: enter into system configuration alarm configurationsensorschedule; refer to Fig 4-22:
Fig 4-22 sensor-schedule
Step2: the setup steps of sensor schedule are familiar with schedule; user can refer to 4.4.1 Schedule for details.
Note: the default schedule of sensor is full-selected, that is, the color of schedule setting interface is blue.