LT Security LTD6299 - Manual (Page 54)

- 53 -
The general operations are as below:
„ ▲▼
Press these buttons to select the items.
„ ESC
Press this button to escape from this screen, and return to Network Setup display. If the
Save dialog is shown, press ENTER to exit and save, ESC to exit without saving.
Following is a brief description for each item and its specific operations:
„ SMTP Server – SMTP mail server name. Please follow the Text Input method
described in Section 4.1 to modify this item.
„ Authentication – whether the SMTP mail server requires authentication. Press ENTER
to check/uncheck this item.
„ Username – username if the SMTP mail server requires authentication. Please follow
the Text Input method described in Section 4.1 to modify this item.
„ Password – password if the SMTP mail server requires authentication. Please follow
the Text Input method described in Section 4.1 to modify this item.
„ Mail From – the e-mail address of this DVR unit, i.e. the sender of the e-mails originated
from the triggered events. Please follow the Text Input method described in Section 4.1
to modify this item.
„ Mail To #1-5 – the receivers’ e-mail addresses. The system can send the e-mails
originated from the triggered events to up to 5 different receivers. Please follow the Text
Input method described in
Section 4.1 to modify these items.
6.10.2 Advanced Network Setup
In Network Setup, press ENTER to call up Advanced Network Setup as shown when the
highlighted option is Adv..
The Advanced Network Setup allows the administrator to set advanced network parameters.
If the user is not familiar with network administration, please DO NOT modify the
items in this dialog.