LT Security LTD6299 - Manual (Page 27)

- 26 -
5.5 Backup Device
In Menu display, press ▲▼ to change the highlighted option to Backup Device, and then
press ENTER to call up Backup Device display as shown below.
The system supports
internal DVD for Internal DVD models and a variety of USB 2.0
storage devices, including Storage Disk such as USB 2.0 storage disk drives and DVD Disc
(including DVD+RW, DVD+R, and DVD-R) . (DVD-RW is not supported.) The
operations are as below:
„ ▲▼◄►
Press these buttons to select the items.
„ ESC
Press this button to escape from this screen, and return to previous display.
„ MODE
Eject the tray and disconnect. (for Internal DVD only)
„ SEQ
Load the tray and connect. (for Internal DVD only)
„ Connect/Disconnect – If the specific backup device is disconnected (as shown in Current
Status), please plug the USB device in one of the USB ports of the system and/or insert a
DVD for DVD device, and then press ENTER to command the system to connect with
the device. If the specific device is already connected (EX. Read/write, as shown in
Current Status), please press ENTER to command the system software to disconnect with
the device, and then unplug the backup device from the backup port.
Note 1: Please DO NOT format the DVD disc for better performance and compatibility.
Note 2: Before using USB pen drive, please format it to FAT32 file system by
MS-Windows.
Note 3: The backup device has to be connected by the system software before it can be
used to read/write.