LT Security LTD6299 - Manual (Page 31)

- 30 -
If the user wants to reset all the settings to factory default values, he/she may press ▲▼ to
change the highlighted option to Factory Defaults, and then press ENTER. A confirmation
dialog will be shown, press ENTER again to make the changes, ESC to not do it.
6.1 Pre-Camera Setup
In Setup Menu display, press ▲▼ to change the highlighted option to Pre-Camera, and then
press ENTER to call up Pre-Camera Setup display as shown.
There are up to 16, 9, or 4 cameras which can be connected to the system. The Pre-Camera
Setup allows the administrator to define some fundamental attributes, which may relate one
camera to the others, for all the installed cameras.
The general operations are as below:
„ ▲▼◄►
Press these buttons to select the items. The display will scroll up/down if the selected
item is not shown on the screen.
„ Numeric (ENTER)
Press these buttons to select the camera.
„ ESC
Press this button to escape from this screen, and return to Setup Menu display. If the
contents have been modified, a Save dialog will be shown to ask the user to save the
changes, press ENTER to exit and save, ESC to exit without saving.
Following is a brief description for each item and its specific operations:
„ REC Resolution – the record resolution for all the cameras in the system. For NTSC, it
can be 720x480, 720x240, or 360x240; for PAL, 720x576, 720x288, or 360x288. Press
+/- buttons to select the resolution.