Lincoln Electric IM707 Commander 500 - Manual (Page 9)

A-1 INSTALLATION
COMMANDER 500 CUMMINS
A-1
TECHNICAL SPECIFICATIONS - COMMANDER 500 CUMMINS (K1846-1 & -2)
Make/Model Description Speed (RPM) Displacement Starting Capacities
System
Cummins 4 cylinder High Idle 1900 199 cu. in 12VDC battery Fuel: 25 gal.
B3.3 56 HP(42kw) Low Idle 1475 (3.3 L) & Starter 94.6 L
Diesel Engine @ 1800 RPM Full Load 1800
Bore x Stroke Oil: 8.0 Qts.
7.5L
3.74” x 4.53”
(95mm x 115mm) Coolant: 2.6 Gal.
11.8 L
INPUT - DIESEL ENGINE
RATED OUTPUT - WELDER
HEIGHT 2 WIDTH DEPTH WEIGHT
42.0 in. 31.5 in. 63.1 in. 1625 lbs.(737 kg)
( Approx.)
1066.8 mm 800.1 mm 1602.7 mm
OUTPUT - WELDER AND GENERATOR
Duty Cycle Welding Output Volts at Rated Amps
100%
500 Amps (DC multi-purpose) 40 Volts
60%
550 Amps (DC multi-purpose) 36 Volts
50%
575 Amps (DC multi-purpose) 35 Volts
Welding Range Open Circuit Voltage Auxiliary Power 1
30 - 575 Amps CC/CV 80 Max OCV @1900 RPM 120/240 VAC
12,000 Watts, 60 Hz.
20 - 250 Amps TIG 100% Duty Cycle
PHYSICAL DIMENSIONS
1. Output rating in watts is equivalent to volt-amperes at unity power factor.
Output voltage is within +/- 10% at all loads up to rated capacity. When welding, available auxiliary power will be reduced.
2. Top of Enclosure. Add 5.6” (142.2mm) for exhaust.