Hired-Hand RS-300 Door: Indicator Switch - Manual

Door Indicator Switch
For RS-300 Doors
RollSeal, INC. • 1751 Co Road 68 • Bremen, AL 35033 • Phone 256-287-7000 • Fax 256-287-7010
Manual Part No. 4802-5085 rev 9-03 Page 1 of 2
Door Indicator Switch Assembly
FIGURE 1
DESCRIPTION
The RollSeal Door Indicator Switch Assembly is an accessory to
RS-300 Doors. The assembly includes the mounting bracket
and curtain switch. The switch can be wired to customer
provided red and green status indicator lights or other status
indicators.
The electrical wiring is customer supplied.
The switch and mounting bracket are shipped pre-assembled
and ready for installation.
When the door indicator switch assembly is received, check for
shipping damage.
Switch Electrical Rating
3 Amps @ 240 V 6 Amps @ 120 V
Door Indicator Switch Installation
FIGURE 2
Product Number
Part Number Model
6421-9909 RS-300 Door Indicator Switch Assy
DANGER
HAZARDOUS VOLTAGES
Failure To Follow These Instructions May Result in Injury
Or Death!
• Ensure All Power Is Removed Before Connecting Or
Disconnecting Wires From The Switch.
• Only A Certified Electrician Should Install Or
Remove The Switch Wires.
• Ensure All Cables And Wiring Are Placed And
Secured Before Turning Power ON Or Operating The
Door.
!
Door Roller
Arm
Mounting
Holes
Wire Fitting
Nut
Wire Access Fitting
(Customer supplied
wiring)
Switch
Mounting
Bracket
Track Nuts
Do Not Install
Here
Switch Assy
Left Track
Door