Hired-Hand Mega Flow SlantWall Fans: Fan & Cone Installation - Manual (Page 9)

HIRED-HAND MFG., INC. • 1733 County Road 68 • Bremen, Alabama 35033 • Phone 256-287-1000 • Fax 256-287-2000
Manual Part No. 4801-5180 Rev 6-08 Page 9 of 10
Carefully lift shutter.
Note: Latch is hidden in this view. See
diagram on page 3.
Slot for latch With shutter in place,
manually open vanes of
shutter to access latch.
Fasten latch (located
inside fan housing) into
slot in flange of shutter.
Firmly lock down latch.
Repeat procedure to
latch opposite side of
shutter.
Shutter Fits Onto Intake Side Of Fan
1. Lift shutter.
2. Check that shutter is flush against housing at all points.
3. Manually open vanes of shutter to gain access to latches on fan housing. Lock shutter latches.
4. Installation complete.
S H U T T E R I N S T A L L A T I O N
Figure 11: Shutter Installation