HATZ Diesel 1B 50 - Manual (Page 66)

Step Activity Figure
6 Tighten the hex nut (1) by ap-
prox. one turn.
7 Insert the exhaust manifold
with the bracket (2) into the
hole and pull it back to the out-
side so that the bracket can no
longer become unhooked.
2
8 Tighten the hex nut.
Clean the exhaust screen in models for rammer operation (1B20 R)
Step Activity Figure
1 Release the hex nut and take
off the exhaust manifold (1).
2 Remove the hex nut from the
bracket (2) and pull out the
screen insert (3).
Maintenance 1B20, 1B27, 1B30, 1B40, 1B50
66 Operator's Manual 1B20-1B50 HATZ