HATZ Diesel 1B 50 - Manual (Page 34)

Pos. Designation
1 Grip
2 Recoil start cover
3 Diagram of starting procedure
Procedure
Step Activity
1 Check the speed control (see the chapter 7.3 Setting the speed
control, page 32).
2 Slowly pull out the grip with the rope until you encounter a slight
resistance.
3 Let the rope run back in to be able to use the entire rope length
for the starting procedure.
4 Hold the grip with both hands.
5 Pull the starting rope evenly and with increasing speed (do not
tear at it jerkily) until the engine starts.
NOTICE
i
When the exhaust emits white smoke after several failed
start procedures:
▪ Move the speed controller lever to the "Stop" position.
▪ Pull the starting rope all the way out five times.
▪ Readjust the speed control (see the chapter 7.3 Setting the
speed control, page 32).
▪ Repeat the start procedure.
Operation and use 1B20, 1B27, 1B30, 1B40, 1B50
34 Operator's Manual 1B20-1B50 HATZ