HATZ Diesel 1B 50 - Manual (Page 54)

Procedure
Step Activity
1 Unscrew the oil drain screw (1) and drain the oil entirely.
2 If necessary (every 1000 operating hours), clean the oil filter as
per chapter 8.2.5 Clean the oil filter, page 54.
3 Screw in the cleaned oil drain screw (1) with the new gasket
(2) and tighten.
Tightening torque: 50 Nm.
4 Add engine oil (see the chapter 4.3 Engine oil, page 24).
8.2.5 Clean the oil filter
Safety notes
CAUTION
Danger of burns.
There is a danger of burns when working on a hot engine.
▪ Let the engine cool before maintenance.
CAUTION
Danger of injury.
When working with compressed air, foreign bodies may fly into
your eyes.
▪ Wear safety goggles.
▪ Never direct the compressed air jet toward people or toward
yourself.
NOTICE
i
▪ Capture emerging oil in a suitable container.
▪ Dispose of the oil according to legal regulations.
Maintenance 1B20, 1B27, 1B30, 1B40, 1B50
54 Operator's Manual 1B20-1B50 HATZ