HATZ Diesel 1B 50 - Manual (Page 60)

Step Activity Figure
9 Perform a test run. Check the
cylinder head cover for tight-
ness.
8.2.7 Maintaining the oil bath filter
Safety notes
CAUTION
Danger of burns.
There is a danger of burns when working on a hot engine.
▪ Let the engine cool before maintenance.
CAUTION
▪ Do not repair the oil bath filter (weld/solder, etc.) as this may
lead to destruction of the filter or damage to the engine.
▪ For model with cyclone precleaner:
Never add oil to the dust trap.
Procedures
The procedure differs depending on how the engine is equipped:
▪ Procedures for oil bath filter without cyclone precleaner
▪ Procedures for oil bath filter with cyclone precleaner
Procedures for oil bath filter without cyclone precleaner
Step Activity Figure
1 Remove the oil container (1).
2 Remove the dirty oil and
sludge and clean the contain-
er.
3 Rinse the filter insert (2) in die-
sel fuel. Before assembling the
filter, drip or wipe dry.
4 Clean the filter housing (3) if it
is very dirty.
Maintenance 1B20, 1B27, 1B30, 1B40, 1B50
60 Operator's Manual 1B20-1B50 HATZ