Elitegroup E07EI1 - Manual (Page 50)

44
• Some software programs, which have not gone through
rigorous coding and testing, may cause problems during your
routine use. Consult the software vendor for problem solving.
• Be sure to go to BIOS SETUP and load DEFAULT SETTING
after BIOS re-flash.
Audio Problems
No speaker output
• Software volume control is turned down in Operating System’s
Sound System or is muted. Double-click the speaker icon on
the lower right corner of the taskbar to see if the speaker has
been muted or turned down all the way.
• Most audio problems are software-related. If your computer
worked before, chances are software may have been set
incorrectly.
Sound cannot be recorded
• Double-click the speaker icon on the lower right corner of the
taskbar to see if the microphone has been muted.
1.
Click Options and select Properties.
2. Select Recording and click the OK button.
3. After clicking the OK button, the recording volume control
panel will appear.
Hard Disk (Optional) Problems
The hard disk drive does not work or is not recognizable:
• If you had just performed a hard disk upgrade, make sure the
hard drive connector is not loose and the hard disk drive is also
correctly seated. Remove it and reinsert it firmly, and restart
your PC. (Refer to Chapter 5 for details.)
• The new HDD may need to be partitioned and reformatted. O/S
and drivers will need to be re-installed as well.
• Check the hard disk indicator LED. When you access a file, the
LED lamp should light up momentarily.
• The new HDD may be defective or is not compatible.
• If your computer has been subjected to static electricity or
physical shock, you may have damaged the disk drive.
The hard drive is making abnormal whining noises
• You should back up your files as soon as possible.