Elitegroup E07EI1 - Manual (Page 35)

29
Security Setup
BIOS SETUP UTILITY
Main Advanced Security Boot Exit
Security Settings
Supervisor Password: Not Installed
User Password: Not Installed
Change Supervisor Password
Change User Password Install or change the
password.
←→ Select Screen
↑↓ Select Item
Enter Change
F1 General Help
F10 Save and Exit
ESC Exit
(C) Copyright 1985-2004, American Megatrends, Inc.
• Supervisor Password: Install or Change the Password.
• User Password: Install or Change the Password.
Using Password Protection
Two Levels of Password Protection are available. The BIOS
provides both a Supervisor and a User password. If you try to
activate both passwords, the Supervisor password must be set first.
The passwords activate two different levels of protection:
1. System always asks for password every time it is powered on.
2. System asks for password only when you attempt to enter
BIOS utility.
The passwords are encrypted and stored in NVRAM. Make sure
you write them down or memorize them. If you loose the
passwords, the computer may need to be sent back to the factory
or to an authorized service dealer to reset the passwords.