Elitegroup E07EI1 User Manual
Page 12
6
Users should ensure for their own protection that the electrical
ground connections of the power utility, telephone lines and
internal metallic water pipe system, if present, are connected
together. This precaution may be particularly important in rural
areas.
Users should not attempt to make such
connections themselves, but should contact the appropriate
electric inspection authority, or electrician, as appropriate.
Power Cord Requirement
The power cord supplied with the AC adapter should match the
plug and voltage requirements for your local area. Regulatory
approval for the AC adapter has been obtained using the power
cord for the local area.
However, if you travel to a different area and need to connect to a
different outlet or voltage, you should use one of the power cords
listed below. To purchase a power cord (including one for a country
not listed below) or a replacement AC adapter, contact your local
dealer.
U.S. and Canada
•
The cord set must be UL-Listed and CSA-Certified or C-UL
Listed.
•
The minimum specifications for the flexible cord are (1) No. 18
AWG, (2) Type SJ, and (3) 3-conductor.
•
The cord set must have a rated current capacity of at least 10
A.
•
The attachment plug must be an earth-grounding type with a
NEMA 5-15P (15A, 125V) or NEMA 6-15P (15 A, 250V)
configuration.
Japan
•
All components of the cord set (cord, connector, and plug)
must bear a “PSE” mark and registration number in
accordance with the Japanese Dentori Law.
•
The minimum specification for the flexible cord are: (1) 0.75
mm
2
conductors, (2) Type VCT or VCTF, and (3) 3-conductor.
•
The cord set must have minimum rated current capacity of 7 A.