Elitegroup E07EI1 - Manual (Page 37)

31
• Boot Device Priority: See Below.
Item Selections /
Sub-menu
Description
First Boot
Device Set the type of device for the first drive
BIOS attempts to boot from. If Realtek
Boot Agent is selected, system will attempt
to load boot sector from the Ethernet port.
Second
Boot Device Set the type of device for the second drive
BIOS attempts to boot from.
Third Boot
Device
USB: M-Sys
uDiskOnChip
USB: Generic
STORAGE
Network: Realtek
Boot Agent
M-System uDiskOnChip is the system’s
built-in flash storage, where programs and data are stored.
The Realtek Boot Agent allows you to boot from the Network.
When the BIOS performs POST, you may also press F11 Key
to enable the Boot Device selection menu. You may choose
“USB: M-Sys uDiskOnChip”, “USB: Generic Storage Device”,
or “Network: Realtek Boot Agent” as the first storage device
to boot from. If you have already connected a USB Floppy
Disk Drive before powering up, it will appear as a USB FDC in
the Boot Device selection menu.