Elitegroup E07EI1 - Manual (Page 21)

15
1. DC-out Connector
The DC-out connector docks to the power jack (DC-in) on
the computer.
2. Adapter
The adapter converts alternating current into constant DC
voltage for the computer.
3. AC Plug
The AC Plug plugs to the AC wall outlet.
LED Status Indicator
The LED Status Indicator displays the operating status of your
notebook. When a certain function is enabled, an LED will light up.
The following section describes the indication.
System & Power Status Indicators
LED Graphic
Symbol
Indication
Green light indicates the system is ON.
Green light indicates the notebook is in the suspend
mode.
Orange light indicates the battery is being charged.
Blinking Orange light indicates the battery power is low.
Green light indicates the battery is Full and the AC
Adapter is plugged in.
No light indicates that the battery pack is removed.
When the AC Adapter is plugged in, the alternating
Green-and-Orange LED light indicates that the system
stops charging the battery because the battery-pack’s
temperature is too high.
Green light indicates the NAND Flash or the hard drive
(optional) is being accessed.
Green light indicates the cap-lock is activated.
Green light indicates the numeric keypad is activated.
Green light indicates the WLAN module is active.