Davey SP800-20,30 Single/3 phase SPAPOWER CONTROLLER - Manual (Page 2)

Contents
1 Introduction................................................................................................................................................ Pg 1
1.1 - Basic Operation..................................................................................................................... Pg 1
1.2 - SP800 Touch pad................................................................................................................... Pg 1
1.3 - LED Indicators......................................................................................................................... Pg 2
1.4 - Pump Selection Page............................................................................................................. Pg 3
2 User Guide Quick Reference...................................................................................................................... Pg 4
3 Pump Operation......................................................................................................................................... Pg 6
3.1 - Pump 1(Two speed, no 24HR circulation pump fitted)............................................................Pg 6
3.2 - Clean up cycle...................................................................................................................... Pg 6
3.3 - Pump 1 (Two speed, 24HR circulation pump fitted)................................................................ Pg 7
3.4 - Pump 1A & 1B (Single speed pumps, no 24hr circulation pump fitted).................................. Pg 7
3.5 - Pump 1A & 1B (Single speed pumps, 24hr circulation pump fitted)....................................... Pg 8
3.6 - 24Hr circulation pump on/off.................................................................................................. Pg 8
4 Auxillary on/off............................................................................................................................................. Pg 8
5 Spa Power Variable Speed Blower (SPVSB)................................................................................................... Pg 9
5.1 - Adjustable speed mode(SPVSB).............................................................................................. Pg 9
6 Spa Power Variable Colour Light (SPVCL)..................................................................................................... Pg 10
6.1 - Adjustable light intensity mode...............................................................................................Pg 10
6.2 - Light effect mode................................................................................................................... Pg 11
6.2.1 - Adjusting the light effect mode speed................................................................. Pg 11
7 Menu Structure............................................................................................................................................ Pg 12
7.1 - Main Menu............................................................................................................................. Pg 13
7.2 - Set temp................................................................................................................................. Pg 14
7.3 - User timer................................................................................................................................ Pg 15
7.4 - Clock...................................................................................................................................... Pg 15
7.4.1 - Setting the clock.................................................................................................. Pg 16
7.5 - User Alarm.............................................................................................................................. Pg 17
7.5.1 - Configuring a user alarm..................................................................................... Pg 17
7.5.2 - Disabling a user alarm......................................................................................... Pg 18
7.6 - Sleep timer............................................................................................................................. Pg 19
7.6.1 - Configuring a sleep time...................................................................................... Pg 19
7.6.2 - Disabling a sleep time period.............................................................................. Pg 21
7.6.3 - Plumbing Purge.................................................................................................... Pg 21
7.7 - Maintenance Timers............................................................................................................... Pg 21
7.7.1 - Maintenance Timer Configuration....................................................................... Pg 22
7.7.2 - Acknowledging a maintenance timer.................................................................. Pg 22
7.7.3 - Configuring a maintenance timer........................................................................ Pg 23
7.7.4 - Disabling a maintenance timer............................................................................ Pg 23
7.8 - Miscellaneous Options Submenu........................................................................................... Pg 24
7.8.1 - Key clicks on/off.................................................................................................... Pg 24
7.8.2 - Main display......................................................................................................... Pg 25
7.8.3 - Changing main display........................................................................................ Pg 25
7.8.4 - Panel colour and intensity.....................................................................................Pg 25
7.8.5 - Changing the touch pad back light colour..........................................................Pg 25
7.8.6 - Changing the touch pad back light intensity....................................................... Pg 25
7.8.7 - Panel and pool light synchronisation (on/off)........................................................ Pg 26
7.8.8 - Enabling/disabling light synchronisation................................................................Pg 26
7.9 - Advanced Options Submenu................................................................................................. Pg 26
7.9.1 - Heat Control......................................................................................................... Pg 27
7.9.2 - Changing heat control setting............................................................................. Pg 27
7.9.3 - Auto filtration/Sanitising (n/a for 24hr circ models)................................................ Pg 28
7.9.4 - Adjusting the filtration time................................................................................... Pg 28
7.9.5 - Adjusting the filtration period................................................................................ Pg 28
7.10 - Load factory Defaults............................................................................................................. Pg 29
7.10.1 - Restoring factory defaults..................................................................................... Pg 29
8 Additional Features..................................................................................................................................... Pg 30
8.1 - Touch pad key lock................................................................................................................ Pg 30
8.2 - Activating the key lock............................................................................................................ Pg 30
8.3 - Disabling key lock................................................................................................................... Pg 30
8.4 - Adjusting Touch pad LCD Contrast......................................................................................... Pg 30
8.5 - Display Reversing.................................................................................................................... Pg 31
8.6 - Language Selection............................................................................................................... Pg 31
9 Self Diagnostic Error Codes......................................................................................................................... Pg 32 Page 33
Error 5 (“OVER TEMP”) Over Temperature
This error indicates that one of the digital temperature sensors in either the heater or pool has detected a
temperature of 45ºC or more. This may not be a problem with the SP800. It may be caused by excessive
pump use in hot weather or pump failure. Turn off the spa and allow time for the water to cool then manually
push the Light Level, Light Effect Mode, Pump 1A and SPVSB buttons simultaneously.
If there is still a problem then contact your spa pool supplier.
Error 6 (“THERMAL CUT OUT”) - Thermal Cut Out Tripped
This error indicates that the safety electromechanical over temperature cut out on the heater has operated.
This is not necessarily a problem with the SP800. It may have occurred from an air lock around the element,
high temperatures during shipping, or pump failure. This automatic cut out will only reset once the element
has cooled below about 38ºC. The unit must then be reset before it will resume operation by manually
pushing the Light Level, Light Effect Mode, Pump 1A and SPVSB buttons simultaneously.
If there is still a problem then contact your spa pool supplier.
Error 7 (“STUCK RELAY”) - Stuck Relay
This error indicates a problem with the heater control circuitry inside the unit. Contact your spa pool supplier.
Error 8 (“NO TEMP DATA”) - No Temperature Data
This error indicates a problem with the digital temperature sensor in the heater or pool wall. The sensor may
have become disconnected or damaged. Try to reset the spa. If there is still a problem then contact your spa
pool supplier.
Error 9 (“CLOCK FAULT”) Real Time Clock Failure
This error indicates a problem with the real time clock within the SP800. Try to reset the spa. If there is still a
problem then contact your spa pool supplier.
Warning 1 (“TEMP SENSOR FAILURE”) - Temperature sensor failure
This warning indicates that one of the two digital temperature sensors in either the heater or pool is no
longer functioning correctly. The spa is able to continue operating using the other sensor, however there is
probably a fault. Contact your spa pool supplier.
If this warning appears when first commissioned it maybe that the controller needs to be set back to factory
default. To set load factory defaults see page 29.
Warnings
Safety Notes
Before using ensure that the spa pool has been connected to a suitable weather protected outlet socket, equipped with a
double pole isolating switch, which is of the correct rating and complies with the local wiring regulations.
When installing, refer to your local wiring code. In particular refer to ECP2 & ECP25 (AS/NZ) and EN60364-4-1 & EN60364-
7-1 (EU). The system must be installed in such a way that live parts are not accessible by a person in the pool. If a supply
cord is not fitted the system must be permanently connected to fixed wiring through a 30mA or less RCD.
It is recommended that the steel reinforcing in any concrete base on which the pool is sitting be equipotential bonded to the
earth conductor in the supply to the spa. This is to protect against the possibility of low voltage shocks caused by differential
earth voltages. Refer to AS/NZS3000:2000 Sections 5.8 & 7.2 or EN 60364.
This appliance is not intended for use by young children or infirm persons without supervision. Young children should be
supervised to ensure they do not play with the appliance.