Davey SP800-20,30 Single/3 phase SPAPOWER CONTROLLER - Manual (Page 18)

Page 16
12 00
3. CLOCK
( SET ) ( ) ( )
:
PM
12 00
[ 12Hr ] [ Mon ]
( SET ) ( ) ( )
:
PM 12
Scroll to SET
12 00
[ 12Hr ] [ Mon ]
( SET ) ( ) ( )
:
[ ] 12Hr
12 00
[ 12Hr ] [ Mon ]
( SET ) ( ) ( )
:
PM 00
12 00
[ 12Hr ] [ Mon ]
( SET ) ( ) ( )
:
PM
[ ] Mon
Scroll to SET
Scroll to SET
7.4.1 Setting The Clock
1) Select the clock menu item from within the main menu.
2) Press the SCROLL button to begin setting the clock.
3) Use the UP and DOWN buttons to select the desired clock mode (12hr or 24hr).
4) Press the SCROLL button to confirm the current setting and move to the next field.
5) Use the UP and DOWN buttons to adjust the selected field as required. Hold down
Either button for automatic key press repeat.
6) Repeat until Mode, Hours, Minutes and Weekday have been set.
Scroll to SET
When SCROLL is pressed to set theday of the week the display reverts back to the default display.
Page 17
Push 4
4. USER ALARMS
- - - -
(SUBMENU) ( ) ( )
USER ALARMS
- - - -
(ESC) ( ) ( )
1. USER ALARM 1
- - - -
DAYS: [ ]
1. SET TEMP
2. USER TIMER
3. CLOCK
4. USER ALARM
5. SLEEP TIMES
6. MAINT TIMERS
7. MISC OPTIONS
8. ADV. OPTIONS
9. LD. DEFAULTS Select MAIN menu then push UP button four times
2) Use the UP and DOWN buttons to select the desired weekdays that the user alarm will
operate. There are 15 possible weekday settings to choose from - Monday to Sunday
and various combinations of each.
1) Select the USER ALARMS submenu by pressing the SCROLL button.
7.5.1 Configuring A User Alarm
The SP800 controller has nine user programmable alarms that you can configure to go off at a preset time while you
are using the spa. These alarms function similarly to a regular clock alarm but with the additional benefit that you can
also specify which days the alarm should operate.
When an alarm goes off the touch pad will beep and display the current time and text indicating which alarm number
is active. Beeping will continue for one minute or until you press a button on the touch pad. There is no effect on any
other spa functions such as pumps, blower, light etc.
The alarms are only active within one hour after the last button press on the touch pad. If you have not used the spa
in over an hour no sound will be produced.
7.5 User Alarms