Brocade Network Advisor SMI Agent Developers Guide v12.3.0 - Manual (Page 146)

130 Brocade Network Advisor SMI Agent Developer’s Guide
53-1003159-01
Alert indications
4
BRCD56 Fabric ID of a logical fabric changed.
Query: SELECT * FROM
CIM_AlertIndication WHERE
OwningEntity=BROCADE and
MessageID=BRCD56
NOTE: BRCD56 indication is supported
only for FOS switches and it is not
delivered if SNMP registration
fails.
AlertingManagedElement COP of Brocade_Fabric
AlertingElementFormat COP
AlertType Other
OtherAlertType Virtual Fabric Alert
AlertSubType VF FID Conflict
PerceivedSeverity 2 (Informational)
ProbableCause 123
SystemCreationClassName Brocade_Fabric
SystemName Fabric WWN
ProviderName Brocade_AlertIndication
Provider
OwningEntity BROCADE
Message FID conflict occured in
Logical Switch
MessageArguments WWN = string switch
WWN
BRCD57 Switch status changed because of the
hardware failures like fans, power supply,
temp sensors.
Query: SELECT * FROM
CIM_AlertIndication WHERE
OwningEntity=BROCADE and
MessageID=BRCD57
NOTE: BRCD57 indication is supported
only for FOS switches. If SNMP
registration fails, then BRCD57
indication is not delivered for FOS
switches.
AlertingManagedElement COP of Brocade_Fabric
AlertingElementFormat COP
AlertType Other
OtherAlertType FRU Alert
AlertSubType FRU Faulted
PerceivedSeverity 5 (Major)
ProbableCause 123
SystemCreationClassName Brocade_Switch
SystemName Switch WWN
ProviderName Brocade_AlertIndication
Provider
OwningEntity BROCADE
Message Switch status
change contributing
factor
MessageArguments WWN = string Switch
WWN,
FRU = Power Supply,
FAN, or Temperature
Sensor
TABLE 14 Supported alert indications (Continued)
Message ID Trigger Property Value