Brocade Network Advisor SMI Agent Developers Guide v12.3.0 - Manual (Page 129)

Brocade Network Advisor SMI Agent Developer’s Guide 113
53-1003159-01
Alert indications
4
BRCD4 Configuration changed
Query: SELECT * FROM
CIM_AlertIndication WHERE
OwningEntity=BROCADE and
MessageID=BRCD4
How to trigger: Perform the CLI
configdownload to the switch.
NOTE: BRCD4 Indication is a switch Alert
indication and it is applicable only
to FOS switches. This indication is
not delivered if SNMP registration
is failed.
AlertingManagedElement COP of Brocade_Switch
AlertingElementFormat COP
AlertType Other
OtherAlertType Switch Alert
AlertSubType Config Change
PerceivedSeverity 2 (Informational)
ProbableCause 123
SystemCreationClassName Brocade_Switch
SystemName Switch WWN
ProviderName Brocade_AlertIndication
Provider
OwningEntity BROCADE
Message Configuration changed
for Switch
MessageArguments WWN = stringSwitch
WWN
BRDC5 SNMP traps were turned on to alert user
login and logout attempts.
Query: SELECT * FROM
CIM_AlertIndication WHERE
OwningEntity=BROCADE and
MessageID=BRCD5
How to trigger: Use the trackchangesset
CLI command to turn on the SNMP traps.
NOTE: BRCD5 indication is supported
only for FOS switches and is not
delivered if SNMP registration is
failed.
AlertingManagedElement COP of Brocade_Switch
AlertingElementFormat COP
AlertType Other
OtherAlertType Switch Alert
AlertSubType Track Change On
PerceivedSeverity 2 (Informational)
ProbableCause 123
SystemCreationClassName Brocade_Switch
SystemName Switch WWN
ProviderName Brocade_AlertIndication
Provider
OwningEntity BROCADE
Message Alert configuration for
login, logout or config
updates was turned ON
for Switch
MessageArguments WWN = string Switch
WWN
TABLE 14 Supported alert indications (Continued)
Message ID Trigger Property Value