Brocade Mobility RFS4000 Controller Installation Guide (Supporting software release 4.3.0.0 and later) - Manual (Page 31)

Brocade Mobility RFS4000 Controller console port setup
4
Brocade Mobility RFS4000 Controller Installation Guide 21
53-1001933-02
2. On the configuration computer, configure a terminal emulation application
(such as HyperTerminal) as follows:
3. On the configuration computer, configure a terminal emulation application
(such as HyperTerminal) as follows:
Terminal type VT-100
Port COM port
Terminal settings 19200bps transfer rate
8 data bits
no parity
1 stop bit
no flow control
no hardware compression
MobilityRFS4000ControllerInstallGuide.book Page 21 Friday, June 10, 2011 1:32 PM