Brocade 7800 Extension Switch Hardware Reference Manual - Manual (Page 45)

Product specifications
● Brocade 7800 components............................................................................................. 45
● Weight and physical dimensions.....................................................................................45
● Facility requirements....................................................................................................... 46
● Power supply specifications............................................................................................ 46
● Environmental requirements........................................................................................... 47
● Power cords (Japan, Denan).......................................................................................... 48
● General specifications.....................................................................................................48
● Data transmission ranges............................................................................................... 49
● Memory specifications.....................................................................................................50
● Fibre Channel port specifications....................................................................................50
● GbE port specifications................................................................................................... 50
● Serial port specifications................................................................................................. 51
● POST and boot specifications.........................................................................................51
● Federal information processing standards (FIPS)...........................................................52
Brocade 7800 components
The switch includes the following components:
• Rack-mountable 1U chassis designed to be mounted in a 19-in. rack space, with forced-air cooling
that flows from the nonport side of the Extension Switch to the port side.
• 16 Fibre Channel ports, compatible with short wavelength (SWL), long wavelength (LWL), and
extended long wavelength (ELWL) SFP transceivers.
• One Ethernet management port with 10/100/1000 Mbps autonegotiating capability
• Six optical/copper SFP GbE ports, compatible with short wavelength (SWL), long wavelength (LWL),
extended long wavelength (ELWL), or copper SFP transceivers
• Two fixed copper RJ-45 GbE ports.
• One IEEE-compliant RJ-45 serial cable, 10-ft (approximately 3 m) long. An RJ-45 to DB9 adaptor is
also provided with the Extension Switch.
• One IEEE-compliant RJ-45 connector on the port side of the Extension Switch for use with a serial
console and 10/100 MBps Ethernet.
• Switch status and management LEDs: 1 power LED, 1 status LED, 2 Ethernet LEDs, 2 FRU LEDs.
• Port status LEDs: 16 Fibre Channel port status LEDs, 6 optical/copper GbE port status LEDs, and 2
LEDs (one each for fault and status/activity) per fixed copper GbE port (total of 4 LEDs).
• 2 universal AC input and redundant power supplies with AC switches and built-in fans.
Weight and physical dimensions
The following table lists the weight and dimensions of the Brocade 7800.
Brocade 7800 Extension Switch Hardware Reference Manual 45
53-1001350-05