Brocade 7800 Extension Switch Hardware Reference Manual - Manual (Page 20)

• Verify that the additional weight of the Brocade 7800 does not exceed the rack’s weight limits or
unbalance the rack in any way.
• Secure the rack to ensure stability in case of unexpected movement.
DANGER
Make sure the rack housing the device is adequately secured to prevent it from becoming
unstable or falling over.
Installation Precautions
Review all installation precautions before installing the device. Refer to Cautions and Danger Notices
on page 59 for translations of all safety notices referenced in this manual.
General precautions
DANGER
The procedures in this manual are for qualified service personnel.
CAUTION
Changes or modifications made to this device that are not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
DANGER
All fiber-optic interfaces use Class 1 lasers.
Power precautions
This Extension Switch might have more than one power cord. To reduce the risk of electric shock,
disconnect both power cords before servicing.
DANGER
Remove both power cords before servicing.
DANGER
Disconnect the power cord from all power sources to completely remove power from the
device.
CAUTION
Before plugging a cable into to any port, be sure to discharge the voltage stored on the cable
by touching the electrical contacts to ground surface.
Connect the power cord only to a grounded outlet.
Installation Precautions
20 Brocade 7800 Extension Switch Hardware Reference Manual
53-1001350-05