Electrical safety, Regulatory certifications – Brocade 5300 Hardware Reference Manual User Manual
Page 48
36
Brocade 5300 Hardware Reference Manual
53-1000858-04
Regulatory compliance
A
ATTENTION
Do not attempt to replace the real-time clock (RTC) battery. There is danger of explosion if the battery
is incorrectly replaced or disposed of. Contact your switch supplier if the real-time clock begins to
lose time.
Electrical safety
ATTENTION
This switch might have more than one power cord. To reduce the risk of electric shock, disconnect
both power cords before servicing.
ATTENTION
Connect the power cord only to a grounded outlet.
ATTENTION
This product is designed for an IT power system with phase-to-phase voltage of 230V. After operation
of the protective device, the equipment is still under voltage if it is connected to an IT power system.
Regulatory certifications
lists the EMC compatibility for the Brocade 5300.
TABLE 13
EMC (electromagnetic compatibility)
Country
Safety
EMC
United States
Bi_Nat UL/CSA 60950-1 1st Ed or
latest
ANSI C63.4
Canada
Bi_Nat UL/CSA 60950-1 1st Ed or
latest
ICES-003 Class A
Japan
CISPR22 and JEIDA (Harmonics)
European Community
EN60950-1 or latest
EN55022 and EN55024
Australia/New Zealand
EN55022 or CISPR22 or AS/NZS
CISPR22
Argentina
IEC60950-1 or latest
Russian Federation
IEC60950-1 or latest
51318.22-99 and 51318.24.99
Korea
KN22 and KN24
China (PS only)
GB4943-2001 and
GB9254-1998 or latest
GB17625.1-2003 or latest
Taiwan (PS only)
CNS 14336(94) or latest
CNS 13438(95) or latest