Brocade 5300 Hardware Reference Manual - Manual (Page 39)

Brocade 5300 Hardware Reference Manual 27
53-1000858-04
Appendix
A
Brocade 5300 Specifications
In this appendix
• Switch components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
• Weight and physical dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
• Facility requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
• Power supply specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
• Environmental requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
• General specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
• Data transmission ranges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
• Memory specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
• Fibre Channel port specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
• Serial port specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
• Regulatory compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Switch components
The Brocade 5300 switch includes the following components:
• Cabinet-mountable 2U chassis designed to be mounted in a 19-in. cabinet space, with
forced-air cooling that flows from the non-port side of the switch to the port side
• 80 Fibre Channel ports, compatible with short wavelength (SWL), long wavelength (LWL), and
extended long wavelength (ELWL) SFP transceivers
• Two IEEE-compliant RJ-45 connector on the port side of the switch for use with a serial console
and 10/100 MB Ethernet
• 80 port Link LEDs, one switch power LED, one switch status LED, two Ethernet LEDs, two
power supply LEDs, and three fan LEDs
• 2 universal AC power supplies with AC switches and built-in fans
• 3 fan assemblies containing two fans each. The fans have two speeds, which are set
automatically and cannot be modified. They default to high speed upon boot, then switch to
low speed as Fabric OS comes online, returning to high speed only as required.