beautypg.com

Activating a slot-based licensed feature, Assigning a license to a slot, Assigning 10g licenses – Brocade Fabric OS Software Licensing Guide (Supporting Fabric OS v7.3.0) User Manual

Page 31

background image

Some features may require additional configuration, or you may need to disable and re-enable the
switch to make them operational; refer to the feature documentation in Fabric OS Administrator's
Guide
for details.

switch:admin> licenseshow

aAYtMJg7tmMZrTZ9JTWBC4SXWLJMY3QfBJYHG:

Fabric license

Remote Switch license

Remote Fabric license

Extended Fabric license

Entry Fabric license

Fabric Watch license

Performance Monitor license

Trunking license

4 Domain Fabric license

FICON_CUP license

High-Performance Extension over FCIP/FC license

Full Ports on Demand license - additional 16 port upgrade license

2 Domain Fabric license

Integrated Routing license

Storage Application Services license

FICON Tape license

FICON XRC license

Inter Chassis Link license

Enhanced Group Management license

8 Gig FC license

DataFort Compatibility license

Activating a slot-based licensed feature

Use the following procedure to activate a slot-based licensed feature:

1.

Install a slot-based license on the platform with sufficient slot count for the number of slots upon
which you plan to activate the feature.

2.

Configure slots so that the licensed feature is assigned to slots. No more slots can be configured
than specified in the license.

3.

Configure the application that uses the licensed feature on the blade in the slot. This operation
verifies that the previous two steps have been successfully completed.

Once these steps are complete, the feature will work on the blade.

Assigning a license to a slot

Use the following procedure to assign a license to a slot.

1.

Connect to the switch and log in using an account with admin permissions, or an account with OM
permissions in the license class of RBAC commands.

2.

Enter the licenseSlotCfg --add command to add the license to the appropriate slot.

Assigning 10G licenses

This section describes the procedures to assign 10G licenses.

Activating a slot-based licensed feature

Fabric OS Software Licensing Guide

29

53-1003139-01