Power specifications, Data transmission ranges – Brocade Encryption Switch Hardware Reference Manual (Supporting Fabric OS v6.1.1_enc) User Manual
Page 48
34
Brocade Encryption Switch Hardware Reference Manual
53-1001117-02
A
Power specifications
The power supplies are universal and capable of functioning worldwide without voltage jumpers or
switches. They meet IEC 61000-4-5 surge voltage requirements and are autoranging in terms of
accommodating input voltages and line frequencies. Each power supply has a built-in fan for
cooling, pushing air towards the port side of the switch.
lists the power specifications for the switch.
Data transmission ranges
provides the data transmission ranges for different cable types and port speeds.
NOTE
The full range of 1, 2, 4, and 8 Gbps can only be achieved by a combination of 4 Gbps SFPs (1, 2,
and 4 Gbps) and 8 Gbps SFP+ (2, 4, and 8 Gbps).
TABLE 5
Power specifications
Specification
Value
Input voltage
100 - 240 VAC, universal
Input line frequency
47 - 63 Hz
System power consumption
285 Watts nominal
TABLE 6
Supported optics, speeds, cables, and distances
Transceiver type
Form factor
Speed
Multimedia
(62.5 um)
(OM1)
Multimedia
(50 um)
(OM2)
Multimedia
(50 um)
(OM3)
Single Mode Media
(9 um)
SFP
1 Gbps
300 m
500 m
860 m
N/A
SW
SFP/SFP+
2 Gbps
150 m
300 m
500 m
N/A
SFP/SFP+
4 Gbps
70 m
150 m
380 m
N/A
SFP+
8 Gbps
21 m
50 m
150 m
N/A
SFP
2 Gbps
N/A
N/A
N/A
30 km
LW
SFP
4 Gbps
N/A
N/A
N/A
30 km
SFP+
8 Gbps
N/A
N/A
N/A
N/A