About this document, How this document is organized, Supported hardware and software – Brocade VDX 6740 Hardware Reference Manual (Supporting VDX 6740, VDX 6740T, and VDX 6740T-1G) User Manual
Page 7

Brocade VDX 6740 Hardware Reference Manual
vii
53-1002829-02
About This Document
In this chapter
•
•
Supported hardware and software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii
•
•
•
•
•
How this document is organized
This document is organized to help you find the information that you want as quickly and easily as
possible.
The document contains the following components:
•
Chapter 1, “Brocade VDX 6740 Introduction”
provides an overview of the Brocade VDX 6740
switch.
•
Chapter 2, “Brocade VDX 6740 Installation”
provides the information needed to install the
switch into your network.
•
Chapter 3, “Brocade VDX 6740 Configuration”
lays out the tasks and commands necessary to
get the switch up and running.
•
Chapter 4, “Brocade VDX 6740 Operation”
discusses the day-to-day operational procedures for
using the switch.
•
Chapter 5, “Brocade VDX 6740 FRU Replacement Procedures”
provides procedures for
removing and replacing the field-replaceable units (FRUs), including the fan assemblies and
power supplies.
•
Appendix A, “Brocade VDX 6740 Specifications”
provides tables of physical, environmental,
and general specifications.
Supported hardware and software
This document is specific to the Brocade VDX 6740, Brocade VDX 6740T, and Brocade VDX
6740T-1G under Network OS v4.1.0 and later.