Verifying operation – Brocade VDX 6740 Hardware Reference Manual (Supporting VDX 6740, VDX 6740T, and VDX 6740T-1G) User Manual

Page 23

Brocade VDX 6740 Hardware Reference Manual

53_1002829_02

Verifying operation

NOTE

Power is supplied to the switch as soon as the first power supply is connected and powered on.

3. After POST is complete, verify that the switch power and status LEDs on the port side of the

switch are green.

Verifying operation

After you have powered the system on and POST is complete, verify that the switch is working
properly.

1. Verify that the power supply LEDs are solid green. Refer to

and

for the

location of these LEDs.

2. Verify that the system power LED and the system status LED is solid green. Refer to

and

and for the specific locations of these LEDs.

3. The port LEDs should be lit during POST activities. When POST is complete, only the LEDs for

ports connected to other devices should be green. Refer to

for the

specific locations of these LEDs.

Refer to

for more details on the LED patterns.