Anthro Elevate Original Adjusta Assembly Instructions - Manual (Page 5)

4 Questions? Call us at 800.325.3841 or visit anthro.com. We’re happy to walk you through the assembly!
Elevate Adjusta Assembly Instructions 5
STEP 6
Attach Adjusta Mechanism to Monitor Surface
¡ Loosely attach the second Mechanism Arm
to the Monitor Surface using a total of six
1" Button-head Screws.
¡ Align the brake assembly with the six holes
on the Monitor Surface. It may be necessary
to depress the paddle in order to position
the brake.
¡ Secure the brake assembly with six 1"
Button-head Screws.
STEP 5B
Align the Adjusta Mechanism
¡ Locate the two Adjusta Mechanism Arms.
Align each arm with the pre-drilled holes
on the Monitor Surface. Loosely attach one
Mechanism Arm with six 1" Button-head
Screws.
¡ Align one end of the Crossbar Assembly
with the Threaded Pin and upper "button"
on the Mechanism Arms. Repeat for the
other end. Using the 3-way Wrench, secure
the Crossbar to the Mechanism Arms with a
5/16" Hex Nut onto the Threaded Pin.
Brake/Paddle
Assembly
Crossbar
Mechanism
Arm
Mechanism Arm
Mechanism Arm
Detail View
Wide View
1” Btn-Hd Screw
325-5580-00
1” Btn-Hd Screw
325-5580-00