Anthro Elevate Original Adjusta Assembly Instructions - Manual (Page 3)

Elevate Adjusta Assembly Instructions 3
STEP 1
Attach the Legs to the Base Tubes
¡ Align a leg with the opening on the base tube so that
the slot on the leg is facing the hole on the base tube,
and the cord comes out the top.
¡ Attach with four Socket Head Cap Screws.
¡ Repeat for the second leg.
20mm Socket Head Cap Screw
325-5272-00
Leg
Basetube
Slot
Rear
Front
Hole
STEP 2
Attach Gussets to Legs
¡ Align a gusset with a leg so that the side flange is on
the outside, the cord is on the inside, the back bend is
over the rear of the tube, and the screw holes on the
top of the gusset match the threaded holes on the top
of the leg.
¡ Secure each gusset to a leg with four socket-head cap
screws.
20mm Socket Head Cap Screw
325-5272-00
Shelf Gusset (X) Shelf Gusset (Y)
Rear
Front Front
Back Bend
Cord
Cord