Anthro Carl's Table CT12 Owners Manual - Manual (Page 3)

Introduction
Carl’s Table is designed to provide comfort, privacy, and lighting by making the table very adjustable. Controls located on the upper
corners of the keyboard surface adjust the height (28" to 48") and tilt (0 to 15° ) of the table surfaces, the height and depth of the
monitors, air movement, and lighting. Available adjustments:
¡ Monitor Control System™ – Electronically adjust the height and depth of the monitors using the control pad on the right side of the
work surface. Adjust the tilt of each monitor manually.
¡ Surfaces – Electronically adjust the height and tilt of CT08 to work while standing, sitting or reclining. Position the table manually, or
use the position preset feature and record your preferred height and tilt settings.
¡ Adaptive Lighting System – Adjust the table's ambient light system manually or switch to AUTO mode and the table senses the
monitor brightness and automatically adjusts the ambient light to provide the optimal contrast ratio. Task lights are adjusted
manually.
¡ Air Circulation System – Two fans, one on the left side and one of the right side of the work surface, keep air moving so you stay
refreshed. Each fan has its own on/off switch; air flow direction is adjusted manually.
¡ Footrest – Put your feet up!
Let’s Start with Your Chair
Choose a chair that reclines back and supports you comfortably when sitting. Scoot all the way in so you can view the monitors better
and your arms are supported by the work surface. We recommend our Verté Chair, Part Number 904BK.
Homing the Table
Homing the table's electric lift system is required each time the table powers up, either after installation or after being shut off. Leave
CT12 powered on except when moving the table.
¡ First, turn the table on and wait one minute.
¡ Using the height adjustment button on the keypad, lower the table to its lowest position until it stops, then hold the button down for
5 seconds. You will feel the work surface settle gently into place.
¡ Using the tilt adjustment button on the keypad, tilt the table to horizontal until it stops, then hold the button down for 5 seconds.
You will feel the work surface settle gently into place.
¡ Home the Monitor Control System. Using the monitor depth adjustment button, move the monitors all the way back until they stop,
then hold the button down for 5 seconds. No homing is necessary for the height adjustment of the monitors.
Adjusting Your Table Height
It’s vital to vary your position as much as possible throughout the day. So Carl’s Table has a motorized height adjustment from 28" to 48"
and you can work sitting or standing with just the touch of a button. The height adjustment button is located on the keypad on the
right side of the work surface.
Changing Your Table Angle
Orthopedic surgeons and other work injury experts say a 90° angle in your elbows and knees is best when working at a desk. And Carl’s
Table lets you electronically tilt the main work surface up to 15° so you can maintain this healthy position even as you recline.
CT12 OWNERS' MANUAL AND TROUBLE-SHOOTING GUIDE
Carl's Table ® CT08 Owner's Manual and Trouble-shooting Guide 3